Updated for NBA 2K27 · Lifetime updates included with every purchase

Apollos.

Setup guide

Load Swish in two minutes

Four steps, no prior Zen experience needed. Support is there if you get stuck.

  1. Step 1

    Download the script

    • Open your Whop purchases page and find Swish. The download is a single .gpc file.
    • Save it somewhere easy to find, like your Desktop. Do not rename it.
  2. Step 2

    Connect the Zen to your PC

    • Use the PROG (side) USB port on the Zen, not the console port, and plug it into your PC.
    • Open Zen Studio. If it asks to update firmware, let it finish first.
  3. Step 3

    Write it to a slot

    • Go to the Programmer tab, drag the .gpc onto any of the eight slots, and press Program Device.
    • When the bar finishes, unplug from the PC and connect the Zen to your console as normal.
  4. Step 4

    Tune it from the OLED

    • Select the slot on the Zen. The on-screen menu lets you set green timing, release speed, tempo and toggles without a PC.
    • Save your setup to one of the three profiles. Switch mid-game with L2 + Share.

Dialling it in

Starter settings

Good defaults for the first session. Tweak from there.

Green timing
Start at the value the guide lists for your jumpshot, then move in 10 ms steps until releases are consistent.
Release speed
2K27 has four: Very Quick, Quick, Normal, Slow. Match the one in your MyPlayer build.
Shot cue
If you use a vibration cue, keep it under 40 ms so it fires ahead of the release, not on it.
Profiles
Keep one profile per build. A shooter and a slasher want different tempo and dunk settings.